An Optimized Energy Harvesting Circuit for Low-Power IoT Applications

Authors

  • Arnob Barua Department of Electrical and Electronic Engineering, University of Science and Technology Chittagong (USTC), Bangladesh
    • Md. Salauddin Rasel Department of Electrical and Electronic Engineering, East Delta University, East Nasirabad, Khulshi, Chattogram, Bangladesh https://orcid.org/0000-0001-6909-7419 (unauthenticated)

      DOI:

      https://doi.org/10.47981/j.mijst.10(01)2022.336(41-48)

      Keywords:

      energy harvesting, power management circuit, self-regulating, stable output power, internet of things

      Abstract

      The concept and development of an independent energy harvesting mechanism functioning intermittently are described in this paper. A power management circuit (PMC) that is self-regulating, an energy scavenging module, a circuit for charging batteries, as well as an electronic load are all a component of the system that has been proposed. This proposed circuit is designed to attain a fixed output power with a diverse input range. In the unavailability of an additional voltage supply, the PMC can react, maintain, and smartly control the electronic load's power supply. The self-powered energy accumulating technique is expected to be used in situations when supplied power is inadequate to drive the load properly, such as Internet of Things (IoT) applications. IoT is a dispersed architecture of reduced-power, limited-storage, lightweight, and nodes that are adaptive. The majority of embedded IoT devices and low-power IoT sensors are driven by short-life batteries that must be replaced every few years. This procedure is expensive and efficient energy regulation could be critical in enabling energy savings for connecting IoT devices. Experiments with the proposed PMC show that the voltage stored in the capacitor remained mostly fixed at 3.3V at widely diverse inputs that vary from 850mV to 4V. At 3.5V input voltage, a peak efficiency of 88.67% is achieved while the load resistance considered is 230Ω.

      Downloads

      Download data is not yet available.

      References

      Ababneh, M. M., Ugweje, O., & Jaesim, A. (2019). Optimized Power Management Unit for IoT Applications. 2019 15th International Conference on Electronics, Computer and Computation (ICECCO), 1–4. https://doi.org/10.1109/ICECCO48375.2019.9043189

      Adu-Manu, K. S., Adam, N., Tapparello, C., Ayatollahi, H., & Heinzelman, W. (2018). Energy-harvesting wireless sensor networks (EH-WSNs): A review. In ACM Transactions on Sensor Networks. https://doi.org/10.1145/3183338

      Ahmad, S., Alam, N., & Hasan, M. (2017). Robust TFET SRAM cell for ultra-low power IoT application. EDSSC 2017 - 13th IEEE International Conference on Electron Devices and Solid-State Circuits. https://doi.org/10.1109/EDSSC.2017.8333263

      Bkheet, S. A., & Agbinya, J. I. (2021). A Review of Identity Methods of Internet of Things (IOT). Advances in Internet of Things. https://doi.org/10.4236/ait.2021.114011

      Cabello, D., Ferro, E., Pereira-Rial, O., Martinez-Vazquez, B., Brea, V. M., Carrillo, J. M., & Lopez, P. (2020). On-Chip Solar Energy Harvester and PMU with Cold Start-Up and Regulated Output Voltage for Biomedical Applications. IEEE Transactions on Circuits and Systems I: Regular Papers. https://doi.org/10.1109/TCSI.2019.2944252

      Fang, Y., Tang, T., Li, Y., Hou, C., Wen, F., Yang, Z., Chen, T., Sun, L., Liu, H., & Lee, C. (2021). A high-performance triboelectric-electromagnetic hybrid wind energy harvester based on rotational tapered rollers aiming at outdoor IoT applications. IScience. https://doi.org/10.1016/j.isci.2021.102300

      Fu, X., Bu, T., Li, C., Liu, G., & Zhang, C. (2020). Overview of micro/nano-wind energy harvesters and sensors. In Nanoscale. https://doi.org/10.1039/d0nr06373h

      Gomez-Casseres, E. A., Arbulu, S. M., Franco, R. J., Contreras, R., & Martinez, J. (2016). Comparison of passive rectifier circuits for energy harvesting applications. Canadian Conference on Electrical and Computer Engineering. https://doi.org/10.1109/CCECE.2016.7726840

      Hu, Y., Yue, Q., Lu, S., Yang, D., Shi, S., Zhang, X., & Yu, H. (2018). An adaptable interface conditioning circuit based on Triboelectric Nanogenerators for self-powered sensors. Micromachines. https://doi.org/10.3390/mi9030105

      Jayakumar, S., Lokesh Kumar, K., Purva Darshini, S. K., & Sanjeev, D. (2021). Traffic monitoring system using IoT and DL. Advances in Parallel Computing. https://doi.org/10.3233/APC210141

      Kalaivaani, P. T., & Krishnamoorthi, R. (2020). Design and implementation of low power bio signal sensors for wireless body sensing network applications. Microprocessors and Microsystems. https://doi.org/10.1016/j.micpro.2020.103271

      Kaur, N., & Sood, S. K. (2017). An Energy-Efficient Architecture for the Internet of Things (IoT). IEEE Systems Journal. https://doi.org/10.1109/JSYST.2015.2469676

      Krishnamurthi, R., Kumar, A., Gopinathan, D., Nayyar, A., & Qureshi, B. (2020). An overview of iot sensor data processing, fusion, and analysis techniques. In Sensors (Switzerland). https://doi.org/10.3390/s20216076

      Leeuw, S., & Srivastava, V. M. (2021). Realization with Fabrication of Double-Gate MOSFET Based Buck Regulator. International Journal of Electrical and Electronic Engineering & Telecommunications, 10(1), 66–75. https://doi.org/10.18178/ijeetc.10.1.66-75

      Li, M., & Jing, X. (2021). A bistable X-structured electromagnetic wave energy converter with a novel mechanical-motion-rectifier: Design, analysis, and experimental tests. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2021.114466

      Lin, L., Tang, Z., Tan, N., & Xiao, X. (2020). Power management in low-power MCUs for energy IoT applications. Journal of Sensors. https://doi.org/10.1155/2020/8819236

      Marinakis, V., & Doukas, H. (2018). An Advanced IoT-based System for Intelligent Energy. Sensors.

      Mayer, P., Magno, M., & Benini, L. (2021). Smart Power Unit—mW-to-nW Power Management and Control for Self-Sustainable IoT Devices. IEEE Transactions on Power Electronics, 36(5), 5700–5710. https://doi.org/10.1109/TPEL.2020.3031697

      Miglani, A., Kumar, N., Chamola, V., & Zeadally, S. (2020). Blockchain for Internet of Energy management: Review, solutions, and challenges. In Computer Communications. https://doi.org/10.1016/j.comcom.2020.01.014

      Mishra, S., Unnikrishnan, L., Nayak, S. K., & Mohanty, S. (2019). Advances in Piezoelectric Polymer Composites for Energy Harvesting Applications: A Systematic Review. In Macromolecular Materials and Engineering. https://doi.org/10.1002/mame.201800463

      Muhtaroğlu, A. (2017). Micro-scale energy harvesting for batteryless information technologies. In Lecture Notes in Energy. https://doi.org/10.1007/978-3-319-49875-1_3

      Newell, D., & Duffy, M. (2019). Review of Power Conversion and Energy Management for Low-Power, Low-Voltage Energy Harvesting Powered Wireless Sensors. In IEEE Transactions on Power Electronics. https://doi.org/10.1109/TPEL.2019.2894465

      Prasad, A., & Chawda, P. (2018). Power management factors and techniques for IoT design devices. Proceedings - International Symposium on Quality Electronic Design, ISQED. https://doi.org/10.1109/ISQED.2018.8357314

      Priya, S., Song, H. C., Zhou, Y., Varghese, R., Chopra, A., Kim, S. G., Kanno, I., Wu, L., Ha, D. S., Ryu, J., & Polcawich, R. G. (2019). A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits. In Energy Harvesting and Systems. https://doi.org/10.1515/ehs-2016-0028

      Procel, L. M., Paredes, J., & Trojman, L. (2019). Comparison of Different Technologies for Transistor Rectifiers Circuits for Micropower Energy Harvesters. Latin American Electron Devices Conference, LAEDC 2019. https://doi.org/10.1109/LAED.2019.8714738

      Qin, H., Cheng, G., Zi, Y., Gu, G., Zhang, B., Shang, W., Yang, F., Yang, J., Du, Z., & Wang, Z. L. (2018). High Energy Storage Efficiency Triboelectric Nanogenerators with Unidirectional Switches and Passive Power Management Circuits. Advanced Functional Materials. https://doi.org/10.1002/adfm.201805216

      Raad, H. (2020). Fundamentals of IoT and Wearable Technology Design. In Fundamentals of IoT and Wearable Technology Design. https://doi.org/10.1002/9781119617570

      Rehmani, M. H., Reisslein, M., Rachedi, A., Erol-Kantarci, M., & Radenkovic, M. (2018). Integrating Renewable Energy Resources Into the Smart Grid: Recent Developments in Information and Communication Technologies. IEEE Transactions on Industrial Informatics, 14(7), 2814–2825. https://doi.org/10.1109/TII.2018.2819169

      Safwat, M., & Ibrahim, S. (2021). 91.6% efficient hybrid DC-DC buck converter with wide programmable conversion range. Microelectronics Journal, 114, 105147. https://doi.org/10.1016/j.mejo.2021.105147

      Samie, F., Bauer, L., & Henkel, J. (2016). IoT technologies for embedded computing: A survey. 2016 International Conference on Hardware/Software Codesign and System Synthesis, CODES+ISSS 2016. https://doi.org/10.1145/2968456.2974004

      Shi, T., Hu, G., Zou, L., Song, J., & Kwok, K. C. S. (2021). Performance of an omnidirectional piezoelectric wind energy harvester. Wind Energy. https://doi.org/10.1002/we.2624

      Shyni, S. M., Abitha Memala, W., Bhuvaneswari, C., & Ravi Kumar, D. N. S. (2020). Iot based robot for mine and trespassers detection in defence field. International Journal of Scientific and Technology Research.

      Siddique, A. R. M., Mahmud, S., & Heyst, B. Van. (2015). A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms. In Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2015.09.071

      Sim, S., & Choi, H. (2020). A study on the service discovery support method in the IoT environments. The International Journal of Electrical Engineering & Education, 57(1), 85–96. https://doi.org/10.1177/0020720918813824

      Statista. (2015). IoT: number of connected devices worldwide 2012-2025 (in billions). Statista.

      Tamrin, M. S., & Ahmad, M. R. (2020). Simulation of adaptive power management circuit for hybrid energy harvester and real-time sensing application. International Journal of Power Electronics and Drive Systems (IJPEDS), 11(2), 658. https://doi.org/10.11591/ijpeds.v11.i2.pp658-666

      Tan, Y. K. (2017). Energy harvesting autonomous sensor systems: Design, analysis, and practical implementation. In Energy Harvesting Autonomous Sensor Systems: Design, Analysis, and Practical Implementation. https://doi.org/10.1201/b14572

      Uchino, K. (2018). Piezoelectric Energy Harvesting Systems-Essentials to Successful Developments. In Energy Technology. https://doi.org/10.1002/ente.201700785

      Udoh, I. S., & Kotonya, G. (2018). Developing IoT applications: challenges and frameworks. IET Cyber-Physical Systems: Theory & Applications. https://doi.org/10.1049/iet-cps.2017.0068

      Vanhecke, C., Assouere, L., Wang, A., Durand-Estebe, P., Caignet, F., Dilhac, J.-M., & Bafleur, M. (2015). Multisource and Battery-Free Energy Harvesting Architecture for Aeronautics Applications. IEEE Transactions on Power Electronics, 30(6), 3215–3227. https://doi.org/10.1109/TPEL.2014.2331365

      Villamil, S., Hernández, C., & Tarazona, G. (2020). An overview of internet of things. Telkomnika (Telecommunication Computing Electronics and Control). https://doi.org/10.12928/TELKOMNIKA.v18i5.15911

      Wang, L., Chen, R., Ren, L., Xia, H., & Zhang, Y. (2019). Design and experimental study of a bistable magnetoelectric vibration energy harvester with nonlinear magnetic force scavenging structure. International Journal of Applied Electromagnetics and Mechanics. https://doi.org/10.3233/JAE-180074

      Wang, Z., He, L., Zhang, Z., Zhou, Z., Zhou, J., & Cheng, G. (2021). Research on a Piezoelectric Energy Harvester with Rotating Magnetic Excitation. Journal of Electronic Materials. https://doi.org/10.1007/s11664-021-08910-y

      Woias, P. (2015). 5.6 - Thermoelectric Energy Harvesting from small and variable Temperature Gradients. Tagungsband, 83–88. https://doi.org/10.5162/12dss2015/5.6

      Yan, B., Yu, N., Zhang, L., Ma, H., Wu, C., Wang, K., & Zhou, S. (2020). Scavenging vibrational energy with a novel bistable electromagnetic energy harvester. Smart Materials and Structures. https://doi.org/10.1088/1361-665X/ab62e1

      Zeadally, S., Shaikh, F. K., Talpur, A., & Sheng, Q. Z. (2020). Design architectures for energy harvesting in the Internet of Things. In Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2020.109901

      Zhang, D., Shi, J., Si, Y., & Li, T. (2019). Multi-grating triboelectric nanogenerator for harvesting low-frequency ocean wave energy. Nano Energy. https://doi.org/10.1016/j.nanoen.2019.04.046

      Zhao, C., Yang, Y., Upadrashta, D., & Zhao, L. (2021). Design, modeling and experimental validation of a low-frequency cantilever triboelectric energy harvester. Energy. https://doi.org/10.1016/j.energy.2020.118885

      Zhao, T., Xu, M., Xiao, X., Ma, Y., Li, Z., & Wang, Z. L. (2021). Recent progress in blue energy harvesting for powering distributed sensors in ocean. In Nano Energy. https://doi.org/10.1016/j.nanoen.2021.106199

      Zhao, Z., Liu, J., Wang, Z., Liu, Z., Zhu, W., Xia, H., Yang, T., He, F., Wu, Y., Fu, X., Peng, L. M., Wei, X., & Hu, Y. (2017). Ultrasensitive triboelectric nanogenerator for weak ambient energy with rational unipolar stacking structure and low-loss power management. Nano Energy. https://doi.org/10.1016/j.nanoen.2017.09.010

      Downloads

      Published

      26-06-2022

      Issue

      Section

      ARTICLES

      How to Cite

      Barua, A., & Rasel, M. S. (2022). An Optimized Energy Harvesting Circuit for Low-Power IoT Applications. MIST INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY, 10(1), 41-48. https://doi.org/10.47981/j.mijst.10(01)2022.336(41-48)

      Similar Articles

      21-30 of 69

      You may also start an advanced similarity search for this article.