Evaluation of Physical, Mechanical, and Durability Properties of Limestone Powder Blended Concrete
DOI:
https://doi.org/10.47981/j.mijst.13(02)2025.574(01-13)Keywords:
Blended cement concrete, Limestone powder, Tensile strength prediction, Flexural strength, DurabilityAbstract
Reducing the amount of cement in construction has become a challenge in the 21st century. In this study, limestone powder (LSP) is adopted to partially replace cement by different weight percentages (5%, 10%, 15% and 20%). The influence of LSP on engineering properties such as workability, compressive strength, splitting tensile strength, flexural strength and toughness, water permeability and surface resistivity are investigated to assess the acceptability of LSP blended concrete and to find the optimum replacement level considering these properties. At low replacement level (5% and 10%), the mechanical and durability properties improve due to the nucleation effect of LSP. Beyond 10% replacement, the dilution effect dominates which disadvantages the concrete. The workability linearly rises with the increase in the LSP content. The compressive and tensile strength does not vary much from the control specimen up to 10% replacement level. The highest compressive and flexural strength is recorded for 10% LSP replacement. Toughness calculated from the beam load-deflection curve showed increased value with increased LSP replacement. In comparison to the control specimens, 6.4% higher flexural strength and 90% higher toughness index is achieved for 10% LSP. An equation has been proposed using a machine learning approach to predict the tensile strength of LSP blended concrete with 87% accuracy. Water permeability and chloride ion penetrability are reduced for higher LSP content as LSP works as filler and enhances pore structure. This study summarizes that 10% cement substitution with the LSP can be adopted for overall better mechanical and durability properties of concrete.
Downloads
References
AASHTO TP 95. (2011). Standard Method of Test for Surface Resistivity of Concrete's Ability to Resist Chloride Ion Penetration. American Association of State Highway and Transportation Officials, Washington, DC.
ACI 211.1. (1991). Standard Practive for Selecting Proportions for Normal, Heavyweight, and Mass Concrete. American Concrete Institute, Farmington Hills, MI.
ACI 211.7R-15. (2015). Guide For Proportioning Concrete Mixtures With Ground Limestone and Other Mineral Fillers. American Concrete Institute, Farmington Hills, MI.
ACI 318-14. (2014). Building Code Requirements for Structural Concrete and Commentary. American Concrete Institute, Farmington Hills, MI.
Adel Mohammed, Z., Burhan Abdurrahman, R., & Abdul Hakeem Hamed Ahmad, D. (2010). Influence of Limestone Powder as Partial Replacement of Cement on Concrete and the Effect of High Temperature on It. Al-Rafidain Engineering Journal (AREJ), 18(5), 24-34. doi:10.33899/rengj.2010.32863
Ahmad, I., Shen, D., Khan, K. A., Jan, A., & Ahmad, T. (2022). Evaluation of mechanical properties and environmental impact of using limestone powder in high-performance concrete. Magazine of Concrete Research, 74(24), 1280-1295. doi:10.1680/jmacr.21.00199
Ahmed, A. H., Nune, S., Liebscher, M., Köberle, T., Willomitzer, A., Noack, I., Butler, M., & Mechtcherine, V. (2023). Exploring the role of dilutive effects on microstructural development and hydration kinetics of limestone calcined clay cement (LC3) made of low-grade raw materials. Journal of Cleaner Production, 428, 139438. doi:https://doi.org/10.1016/j.jclepro.2023.139438
Ahmed, T., Bediwy, A., Azzam, A., Elhadary, R., El-Salakawy, E., & Bassuoni, M. T. (2024). Utilization of Novel Basalt Fiber Pellets from Micro- to Macro-Scale, and from Basic to Applied Fields: A Review on Recent Contributions. Fibers, 12(2), 17. doi:https://doi.org/10.3390/fib12020017
Ahmed, T., Bediwy, A., & Islam, M. J. (2025). Durable and sustainable nano-modified basalt fiber-reinforced composites for elevated temperature applications. Journal of Building Engineering, 108, 112865. doi:https://doi.org/10.1016/j.jobe.2025.112865
Amran, M., Makul, N., Fediuk, R., Lee, Y. H., Vatin, N. I., Lee, Y. Y., & Mohammed, K. (2022). Global carbon recoverability experiences from the cement industry. Case Studies in Construction Materials, 17, e01439. doi:https://doi.org/10.1016/j.cscm.2022.e01439
Araf, S., Shahjalal, M., Ahmed, T., Juthi, S., Rahman, S., & Islam, M. (2023). Mechanical and Durability Properties of Induction Furnace Slag and Recycled Aggregate Concrete. Paper presented at the 2nd International Conference on Advances in Civil Infrastructure and Construction Materials, 26-28 July 2023, MIST, Dhaka, Bangladesh.
ASTM C33. (2023). Standard Specification for Concrete Aggregates. Paper presented at the ASTM International, West Conshohocken, PA.
ASTM C39. (2021). Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA.
ASTM C78. (2022). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading). ASTM International, West Conshohocken, PA.
ASTM C150. (2022). Standard Specification for Portland Cement. ASTM International, West Conshohocken, PA.
ASTM C187. (2023). Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste. ASTM International, West Conshohocken, PA.
ASTM C188. (2023). Standard Test Method for Density of Hydraulic Cement. ASTM International, West Conshohocken, PA.
ASTM C191. (2021). Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle. ASTM International, West Conshohocken, PA.
ASTM C204. (2024). Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus. ASTM International, West Conshohocken, PA.
ASTM C496. (2017). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA.
Barbhuiya, S., Kanavaris, F., Das, B. B., & Idrees, M. (2024). Decarbonising cement and concrete production: Strategies, challenges and pathways for sustainable development. Journal of Building Engineering, 86, 108861. doi:https://doi.org/10.1016/j.jobe.2024.108861
Barbhuiya, S., Nepal, J., & Das, B. B. (2023). Properties, compatibility, environmental benefits and future directions of limestone calcined clay cement (LC3) concrete: A review. Journal of Building Engineering, 79, 107794. doi:https://doi.org/10.1016/j.jobe.2023.107794
Benachour, Y., Davy, C. A., Skoczylas, F., & Houari, H. (2008). Effect of a high calcite filler addition upon microstructural, mechanical, shrinkage and transport properties of a mortar. Cement and Concrete Research, 38(6), 727-736. doi:https://doi.org/10.1016/j.cemconres.2008.02.007
Bonavetti, V., Donza, H., Menéndez, G., Cabrera, O., & Irassar, E. F. (2003). Limestone filler cement in low w/c concrete: A rational use of energy. Cement and Concrete Research, 33(6), 865-871. doi:https://doi.org/10.1016/S0008-8846(02)01087-6
BS EN 12390–8:2009. (2009). The Standard for Testing hardened concrete - Depth of Penetration of Water under pressure. British Standards Institution, UK.
Celik, K., Hay, R., Hargis, C. W., & Moon, J. (2019). Effect of volcanic ash pozzolan or limestone replacement on hydration of Portland cement. Construction and Building Materials, 197, 803-812. doi:https://doi.org/10.1016/j.conbuildmat.2018.11.193
Chen, J., Kwan, A., & Jiang, Y. (2014). Adding limestone fines as cement paste replacement to reduce water permeability and sorptivity of concrete. Construction and Building Materials, 56, 87-93.
Chen, J., Kwan, A., & Jiang, Y. (2014). Adding limestone fines as cement paste replacement to reduce water permeability and sorptivity of concrete. Construction and Building Materials, 56, 87–93. doi:10.1016/j.conbuildmat.2014.01.066
Demirhan, S., Turk, K., & Ulugerger, K. (2019). Fresh and hardened properties of self consolidating Portland limestone cement mortars: Effect of high volume limestone powder replaced by cement. Construction and Building Materials, 196, 115-125. doi:https://doi.org/10.1016/j.conbuildmat.2018.11.111
Dhir, R., Limbachiya, M., McCarthy, M., & Chaipanich, A. (2007). Evaluation of Portland limestone cements for use in concrete construction. Materials and structures, 40(5), 459-473. doi:https://doi.org/10.1617/s11527-006-9143-7
Diab, A. M., Abd Elmoaty, A. E. M., & Aly, A. A. (2016). Long term study of mechanical properties, durability and environmental impact of limestone cement concrete. Alexandria Engineering Journal, 55(2), 1465-1482. doi:https://doi.org/10.1016/j.aej.2016.01.031
EN, B. S. (2000). 197-1, Cement-Part 1: Composition, specifications and conformity criteria for common cements. British Standards Institution.
Eurocode 2. (2005). EN 1992-1-1, Design of Concrete Structures – Part 1–1: General Rules and Rules for Buildings. Thomas Telford, London, UK.
fib 2010. (2010). fib Model Code for Concrete Structures. International Fedaration for Structural Concrete.
Gesoğlu, M., Güneyisi, E., Kocabağ, M. E., Bayram, V., & Mermerdaş, K. (2012). Fresh and hardened characteristics of self compacting concretes made with combined use of marble powder, limestone filler, and fly ash. Construction and Building Materials, 37, 160-170.
Hornain, H., Marchand, J., Duhot, V., & Moranville-Regourd, M. (1995). Diffusion of chloride ions in limestone filler blended cement pastes and mortars. Cement and Concrete Research, 25(8), 1667-1678. doi:https://doi.org/10.1016/0008-8846(95)00163-8
Hyun, J. H., Lee, B. Y., & Kim, Y. Y. (2018). Composite Properties and Micromechanical Analysis of Highly Ductile Cement Composite Incorporating Limestone Powder. Applied Sciences, 8(2), 151. doi:https://doi.org/10.3390/app8020151
Islam, M. J., Ahmed, T., Imam, S. M. F. B., Islam, H., & Shaikh, F. U. A. (2023a). Comparative study of carbon fiber and galvanized iron textile reinforced concrete. Construction and Building Materials, 374, 130928. doi:https://doi.org/10.1016/j.conbuildmat.2023.130928
Islam, M. J., Ahmed, T., Salehin, M. R., Sakib, M. S., Shariar, M. S., & Hossain, M. (2023b). Physical, Mechanical, and Durability Properties of Concrete with Class F Fly Ash. MIST INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY, 11(2). doi:10.47981/j.mijst.11(02)2023.430(27-41)
Kępniak, M., Woyciechowski, P., & Franus, W. (2021). Transition Zone Enhancement with Waste Limestone Powder as a Reason for Concrete Compressive Strength Increase. Materials, 14, 7254. doi:10.3390/ma14237254
Kim, Y.-J., Leeuwen, R. v., Cho, B.-Y., Sriraman, V., & Torres, A. (2018). Evaluation of the Efficiency of Limestone Powder in Concrete and the Effects on the Environment. Sustainability, 10(2), 550. doi:https://doi.org/10.3390/su10020550
Li, L. G., & Kwan, A. K. (2015). Adding limestone fines as cementitious paste replacement to improve tensile strength, stiffness and durability of concrete. Cement and Concrete Composites, 60, 17-24. doi:https://doi.org/10.1016/j.cemconcomp.2015.02.006
Li, P. P., Brouwers, H. J. H., Chen, W., & Yu, Q. (2020). Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete. Construction and Building Materials, 242, 118112. doi:https://doi.org/10.1016/j.conbuildmat.2020.118112
Li, V. C. (2003). On engineered cementitious composites (ECC) a review of the material and its applications. Journal of Advanced Concrete Technology, 1(3), 215-230.
Li, W., Huang, Z., Cao, F., Sun, Z., & Shah, S. P. (2015). Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix. Construction and Building Materials, 95, 366-374. doi:https://doi.org/10.1016/j.conbuildmat.2015.05.137
Lin, W.-T., Cheng, A., & Černý, R. (2020). Effect of limestone powder on strength and permeability of cementitious mortars. MATEC Web of Conferences, 322, 01009. doi:10.1051/matecconf/202032201009
Liu, S., & Yan, P. (2010). Effect of limestone powder on microstructure of concrete. Journal of Wuhan University of Technology-Mater. Sci. Ed., 25(2), 328-331. doi:10.1007/s11595-010-2328-5
Lothenbach, B., Le Saout, G., Gallucci, E., & Scrivener, K. (2008). Influence of limestone on the hydration of Portland cements. Cement and Concrete Research, 38(6), 848-860. doi:https://doi.org/10.1016/j.cemconres.2008.01.002
Mahi, M. S. H., Ridoy, T., Faiag, M., & Sheikh, M. (2025). Limestone Powder in Concrete Mixes: A Review of Mechanical Enhancements. Smart and Green Materials, 2, 11-21. doi:10.70028/sgm.v2i1.25
Meddah, M. S., Lmbachiya, M. C., & Dhir, R. K. (2014). Potential use of binary and composite limestone cements in concrete production. Construction and Building Materials, 58, 193-205.
Meghna, N. N., Abida, I., Mashfiq, N. M., Ahmed, T., Karim, M. R., & Islam, M. J. (2025, 2025//). Influence of Mechanical and Durability Properties of Concrete with Limestone Powder. Paper presented at the Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023, Volume 6, Cham.
Mohammed, B. K., & Al-Numan, B. S. (2024). Effectiveness of Limestone Powder as a Partial Replacement of Cement on the Punching Shear Behavior of Normal- and High-Strength Concrete Flat Slabs. Sustainability, 16(5), 2151. doi:https://doi.org/10.3390/su16052151
Nikbin, I. M., Beygi, M. H. A., Kazemi, M. T., Vaseghi Amiri, J., Rabbanifar, S., Rahmani, E., & Rahimi, S. (2014). A comprehensive investigation into the effect of water to cement ratio and powder content on mechanical properties of self-compacting concrete. Construction and Building Materials, 57, 69-80. doi:https://doi.org/10.1016/j.conbuildmat.2014.01.098
Pliya, P., & Cree, D. (2015). Limestone derived eggshell powder as a replacement in Portland cement mortar. Construction and Building Materials, 95, 1-9.
Ratsarahasina, D. M., Ratsimbazafy, H. M., Robisonarison, G. J., Randrianirainy, H. P. B., & Ramaroson, J. D. D. (2022). Etudes Des Influences Du Filler Calcaire Sur La Maniabilité Et Le Retrait Du Béton. International Journal of Progressive Sciences and Technologies, 31(1), 11. doi:10.52155/ijpsat.v31.1.4088
Sezer, G. İ. (2012). Compressive strength and sulfate resistance of limestone and/or silica fume mortars. Construction and Building Materials, 26(1), 613-618.
Shi, J., Wu, Z., Zhuang, J., Zhang, F., Zhu, T., & Li, H. (2023). Synergistic Effects of SAP, Limestone Powder and White Cement on the Aesthetic and Mechanical Properties of Fair-Faced Concrete. Materials, 16(21), 7058.
Vance, K., Kumar, A., Sant, G., & Neithalath, N. (2013). The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash. Cement and Concrete Research, 52, 196-207. doi:https://doi.org/10.1016/j.cemconres.2013.07.007
Wang, D., Shi, C., Farzadnia, N., Shi, Z., & Jia, H. (2018a). A review on effects of limestone powder on the properties of concrete. Construction and Building Materials, 192, 153-166. doi:https://doi.org/10.1016/j.conbuildmat.2018.10.119
Wang, D., Shi, C., Farzadnia, N., Shi, Z., Jia, H., & Ou, Z. (2018b). A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures. Construction and Building Materials, 181, 659-672. doi:https://doi.org/10.1016/j.conbuildmat.2018.06.075
Wang, Q., Yang, J., & Chen, H. (2017). Long-term properties of concrete containing limestone powder. Materials and Structures, 50(3), 168. doi:10.1617/s11527-017-1040-8
Wang, X.-Y. (2020). Optimal mix design of low-CO2 blended concrete with limestone powder. Construction and Building Materials, 263, 121006. doi:https://doi.org/10.1016/j.conbuildmat.2020.121006
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014). Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount. Construction and Building Materials, 65, 140-150. doi:https://doi.org/10.1016/j.conbuildmat.2014.04.063
Zhao, L., He, T., Niu, M., Chang, X., Wang, L., & Wang, Y. (2024). Effect of Limestone Powder Mixing Methods on the Performance of Mass Concrete. 17(3), 617.
Zhou, J., Qian, S., Beltran, M. G. S., Ye, G., van Breugel, K., & Li, V. C. (2010). Development of engineered cementitious composites with limestone powder and blast furnace slag. Materials and structures, 43(6), 803-814. doi:https://doi.org/10.1617/s11527-009-9549-0
Downloads
Published
Issue
Section
License
Copyright (c) 2025 MIST INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
MIJST follows the open access policy.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. This allows anyone to copy, share, distribute, and modify the work for non-commercial purposes, where the original work and source should be properly credited.
