DEVELOPING A SMART CONTROL SYSTEM OF ELECTRICAL APPLIANCES BY COMPUTER INTERFACING

  • N.K. Das CUET
  • Capt. M. Ziauddin Alamgir MIST
  • C.K.Das CUET
  • M. M. Hasan CUET
  • M. M. Rahman CUET
  • M. F. Alam CUET
Keywords: Distance control, Advance Monitoring, IP addresses based control, Client server interface, Visual basic

Abstract

The use of computer interfacing systems for controlling the device is spreading at an increasingly fast pace, with analogous wired
system being substituted by computer interfaced systems alternatives in growing number of industries. As the technology progress
many control system have been developed ranging from high end stuff to our common daily life. The main objective of this
project is to develop a roadmap on communication and control technologies for distributed electrical equipments. Equipments
located at any remote place can be monitored and controlled. The process is mainly to communicate between the two remote
controlling device and setup connection between devices which are to be controlled. The main hallmark is to get access to the
controlling section from any distance location in a convenient way and supervising the system accordingly. The speciality of this
project is that the operator will able to control different devices at home/industry by using a single PC. An added advantage of this
control system is that the operator will able to know the status of the device to be controlled from a remote place. Here, the
algorithm of controlling any kind of electrical equipments is developed. The speeds of a DC motor are controlled as a test case and
also monitor the voltage and current during different speed level of the motor.

Downloads

Download data is not yet available.

References

[1] C programming for microcontroller by Joe Pardue 2nd Edition, published by smily micro, page-137,273,275,287,289.

[2] Serial port complete by Jan Axelson, 2nd Edition. Lakeview Research LLC, page 43-76.

[3] Visual basic for electronic engineering applications by Vincent Himpe, 2nd edition, page-37-47&99-108.

[4] www. wikipidia.org/remote desktop protocol.

[5] www.electrofriends.com

[6] www.picgallery.com

[7] Device switching using PC’s parallel port by Ranjith, page-1-3&6-8.

[8] Muhammad H.R Rashid “Power Electronics” 3rd edition, Page-641.

[9] Wayne Thomasi, “Advanced Electronics Communications Systems”, 6th Edition, page-629

[10] Wireless device server-www.lantronic.com

[11] Control System Engineering by NISE, 4th edition.
Published
2019-11-29
How to Cite
N.K. Das, Capt. M. Ziauddin Alamgir, C.K.Das, M. M. Hasan, M. M. Rahman, & M. F. Alam. (2019). DEVELOPING A SMART CONTROL SYSTEM OF ELECTRICAL APPLIANCES BY COMPUTER INTERFACING. MIST INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY, 3(1). https://doi.org/10.47981/j.mijst.03(01)2011.21(%p)